Job Description
Job Title: Lagging Technician Salary Grade: 1
FLSA: Non-Exempt Physical Grade: 3
Job Status: Full Time Travel Required: 0%
Revision Date: September 20, 2024 Reports To: Production Supervisor
PURPOSE OF POSITION
Perform different jobs, including but not limited to utilizing the saw, installing lag on pulleys, producing defined quantity of parts and components according to specifications.
ESSENTIAL DUTIES AND RESPONSIBILITIES
The following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned.
More specifically, the employee owner will:
- Apply different types of cold bond lagging.
- Identify and appropriately apply various rubber compounds.
- Wrap pulleys and then safely and properly load, close, and operate the autoclave. Load and unload parts and components onto carts.
- Keep record of pulleys, lagging weight, and transfer locations.
- Lay out grooves for patterns including but not limited to herringbone, diamond, and chevron; cut grooves at proper depth and angle.
- Saw craft lag and retainers for installation on drum pulleys.
- Saw fast lag and FLF for installation on wing pulleys.
- Install craft lag and retainers on pulleys using required welding standards for installation.
- Keep supervisor informed of any known materials that should be ordered.
- Ensure all parts and components are accurate according to specifications.
- Perform general housekeeping and maintenance on equipment.
- Perform extra assignments in other areas and related task assignments in the work area.
- Regular, consistent attendance.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Strong commitment to quality and working safely.
- Knowledge and understanding of various paperwork including but not limited to prints, tech standards, and schedules.
- Ability to read various measuring devices (e.g., measuring tape, caliper, micrometer, etc.).
- Effectively communicate and understand job instructions both verbally and written.
- Must be able to work independently and as a team to complete work in a timely manner.
- Ability to function well in a high-paced environment.
EDUCATION – EXPERIENCE – COMPUTER SKILLS
- High school diploma or a general education degree (GED); or
- One to three months related experience and/or training; or
- Equivalent combination of education and experience.
TRAINING – CERTIFICATIONS – LICENSES
- Forklift license.
- Continually participate in additional training related to the job.
COMPETENCIES
To perform this position successfully, an individual should demonstrate the following work competencies:
- Safety and Security - Observes safety and security procedures; uses equipment properly.
- Problem Solving - Identifies and resolves issues in a timely manner.
- Communication Skills – Speaks clearly, listens and receives clarification, and responds to questions.
- Dependability - Follows instructions, responds to management direction, and takes responsibility.
- Quality Assurance - Demonstrates accuracy and thoroughness.
- Ethics/Professionalism - Treats people with respect; works ethically and with integrity.
- Organizational Support - Follows policies and procedures.
- Judgment - Exhibits sound and accurate judgment.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this position, the employee:
- Must be able to frequently stoop/bend.
- Must be able to frequently use hands and arms.
- Must be able to frequently stand and walk.
- Must be able to occasionally lift and/or move more than 50 pounds with assist available.
- Must be able to regularly lift and/or move up to 50 pounds.
- Specific vision abilities required by this job include close, distance, color, and peripheral vision.
- Specific hearing abilities required for this job include the ability to hear equipment alarms and the ability to hear instructions from others.
ENVIRONMENTAL ADAPTABILITY
- The noise level in the work environment is usually very LOUD.
- Occasionally exposed to toxic or caustic chemicals, outdoor weather conditions, and risk of electrical shock.
- Frequently exposed to work near moving mechanical parts, fumes, or airborne particles, extreme heat (non-weather) and vibration.
- Steel-toe safety shoes, safety glasses, protective gloves, grinding shield, and hearing protection are required where posted.
Other Duties
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee owner for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Precision, Inc. is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, the employer will provide reasonable accommodations to qualified individuals with disabilities and encourage prospective and current employee owners to discuss potential accommodations with Precision, Inc.
Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
